| AMI UE207-23MZ20 Mounted Units & Inserts | N1:61 mm; Recommended tightening torque for set screw:22 Nm; L5:27 mm; Brand:SNR; N2:61 mm; L1:65 mm; H2:98 mm; s:24,6 mm; d1:76.2 mm; B1:66,6 mm; |
| AMI UCMFB206-18MZ2 Flange Block Bearings | r1a max:3.3 mm; Characteristic cage frequency, FTF:0.44 Hz; Outer Diameter (mm):112,712; C:23,812 mm; Weight / Kilogram:0; Fatigue limit load, Cu:21.2 kN; Static load, C0:174 kN; T:30,162 mm; Characteristic outer ring frequency, BPF0:10.2 Hz; d1:88.5 mm; |
| AMI UCTBL207-23MZ2RFB Mounted Units & Inserts | Fw:58 mm; Width (mm):22; C:22 mm; Bearing number:RNA 4910UU; Basic dynamic load rating (C):41,3 kN; Basic static load rating (C0):71,1 kN; Da max.:68 mm; Size (mm):58x72x22; Outer Diameter (mm):72; r min.:0,6 mm; |
| AMI BFBL5-16CW Flange Block Bearings | Number of threads:3; H1:23.35 mm; Guideline diameter:200 mm; Tightening torque:8.5 N·m; H:5.6 mm; C:12 mm; Frictional moment CRL:3 N·m; Axial Preload:1.3 N; Tightening torque (Bolt grade 10.9):8.5 N·m; r2 min.:0.3 mm; |
| AMI UCST205-16TC Mounted Units & Inserts | Bearing Bore after Mounting (di) - 65 +0.074 / -0:65 +0.074 / 0; Shaft Size (ds) - 65 -0.100 / -0.130:65 0.100 / 0.130; Shaft Dia., Nominal (d):65.0000; ID Chamfer Length (Ci):0.600; OD Chamfer Length (Co):1.800; Wall Thickness (S3):2.500; ID Chamfer Angle (B deg.):45; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; Bearing Outside Diameter, Nominal(Do):70.000; Material:Wrapped bronze with; |
| AMI UCST211-32C4HR5 Take Up Unit Bearings | rs min:1.1 mm; Characteristic inner ring frequency, BPFI:4.43 Hz; Static load, C0:7.9 kN; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.37 Hz; Bore Diameter (mm):20,000; Characteristic outer ring frequency, BPF0:2.57 Hz; Da max:45.5 mm; Outer Diameter (mm):52,000; d:20,000 mm; |
| AMI UEFBL207-23MZ20W Mounted Units & Inserts | C:22,2 mm; Size (mm):17x47x22.2; Width (mm):22,2; Basic static load rating (C0):11,9 kN; Bearing number:3303-2RS; Bore Diameter (mm):17; (Grease) Lubrication Speed:9500 r/min; d:17 mm; B:22,2 mm; D:47 mm; |
| AMI UKFS310+HA2310 Mounted Units & Inserts | Max Speed (Oil) (X1000 RPM):2; Outer Dia (D):320.0000; Size (mm):180x320x52; Weight (g):19,030.00; Bearing number:NU236 M; Min. Housing Shoulder Dia., Outer (Lo):282.0; Max. Shaft Shoulder Dia. Inner (Li):218.0; Brand:AST; Static Load Rating (Cor):717,000; Bore Diameter (mm):180; |