| No. | Brand | C | T | K | l | a | w | M | H |
| LFT-SC-20M-NL | DODGE | - | - | - | - | - | - | - | - |
| F2B-SCEZ-012-SHSS | DODGE | - | - | - | - | - | - | - | - |
| P4B536-ISAF-608R | DODGE | - | - | - | - | - | - | - | - |
| F4B-SCM-200 | DODGE | - | - | - | - | - | - | - | - |
| FC-S2-111LE | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCEZ-050M-PCR | DODGE | 71.425 mm | - | - | - | - | - | - | - |
| FC-SC-102 | DODGE | - | - | - | 13 mm | - | - | - | - |
| TU-B-100-TUBRG | DODGE | - | - | - | - | - | - | - | - |
| F4B-GTM-25M | DODGE | - | - | - | - | - | - | 8 mm | - |
| FC-IP-304RE | DODGE | 110 mm | - | - | - | - | - | - | - |
| SAF-517X2-15/16 CLSD | DODGE | - | - | - | - | - | - | - | - |
| P2B-DL-014 | DODGE | - | - | - | - | - | - | - | - |
| P2B-C-200 | DODGE | - | - | - | - | - | - | - | - |
| WSTU-SXR-110 | DODGE | 52.375 mm | - | - | - | - | - | 6.5 mm | - |
| F2B-DL-100 | DODGE | - | - | - | - | - | - | - | - |
| SFCN-IP-408R | DODGE | - | - | - | - | - | - | - | - |
| 55931 | DODGE | - | - | - | - | - | - | - | - |
| WSTU-SXV-40M | DODGE | - | - | - | - | - | - | - | 217.488 mm |
| F4B-GTM-55M | DODGE | - | - | - | - | - | - | - | - |
| P4B520-USAF-307TT | DODGE | - | - | - | - | - | - | - | - |
| F2B-SC-200-FF | DODGE | - | - | - | - | - | - | - | - |
| EF4B-IP-112LE | DODGE | - | - | - | - | - | - | - | - |
| INS-IP-300R | DODGE | - | - | - | - | - | - | - | - |
| WSTU-SCEZ-030M-PCR | DODGE | - | - | - | - | - | 24 mm | - | - |
| DODGE F4S-IP-206LE Flange Block Bearings | rb max.:1 mm; Reference speed:10000 r/min; Db min.:52 mm; Mass bearing:0.17 kg; d1 ≈:43.6 mm; T:17 mm; Basic dynamic load rating C:43.9 kN; Calculation factor Y0:0.8; Da max.:49 mm; db min.:37 mm; |
| 2.938 Inch | 74.625 Millimeter x 2.281 Inch | 57.937 Millimeter x 3.25 Inch | 82.55 Millimeter DODGE P2B-SCU-215 Pillow Block Bearings | B:24.00 mm; Sealed Speed Rating n3:0 rpm; Basic Dynamic Radial Load Rating C:76100 N; d:200.000 mm; Oil Speed Rating Open/Shielded n2:2800 rpm; Basic Static Radial Load Rating Co:95000 N; Accessories:Two Seals; Fillet Radius ra:1.50 mm; D:250.0000 mm; Grease Speed Rating Open/Shielded n1:2200 rpm; Size (mm):2.938 Inch | 74.625 Millimeter x 2.281 Inch | 57.937 Millimeter x 3.25 Inch | 82.55 Millimeter ; |
| DODGE CYL-SC-015 Cartridge Unit Bearings | Appropriate attachment bolt size G:0.625 in; H2:41.275 mm; Cap bolt:2 x 5/8-11 UNC; dc:85.725 mm; P60°:101 kN; Pa:27.1 kN; da:90 mm; J1:53.975 mm; A1:98.425 mm; Taconite seal (dc shaft position):TER 191; |
| 2.438 Inch | 61.925 Millimeter x 3.422 Inch | 86.919 Millimeter x 2.75 Inch | 69.85 Millimeter DODGE P4B-IP-207R Pillow Block Bearings | Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:6700 rpm; Basic Static Radial Load Rating Co:30000 N; B:39.69 mm; Basic Dynamic Radial Load Rating C:52000 N; D:100.0000 mm; Oil Speed Rating Open/Shielded n2:8000 rpm; Sealed Speed Rating n3:4500 rpm; d:45.000 mm; Fillet Radius ra:1.50 mm; Size (mm):2.438 Inch | 61.925 Millimeter x 3.422 Inch | 86.919 Millimeter x 2.75 Inch | 69.85 Millimeter ; |
| DODGE SFC-IP-500RE Flange Block Bearings | R1:46.038 mm; h:28.575 mm; H:161.925 mm; PG:1/8 NPT; Adapter sleeve assembly:SNW 15x2.3/8; L:285.75 mm; P90°:59.6 kN; Cap bolt, SAE grade:8; Initial grease fill:68.04 g; P150°:33.4 kN; |
| DODGE F4B-GT-104S Flange Block Bearings | d:30.163 mm; Recommended diameter for attachment bolts, inch G:0.375 in; Limiting speed:1200 r/min; Thread grub screw G2:1/4-28 UNF; L:108 mm; J7:24.5 mm; Hexagonal key size for grub screw N:3.175 mm; A:32.5 mm; Fatigue load limit Pu:0.475 kN; Housing material:Cast iron; |
| 6.938 Inch | 176.225 Millimeter x 10.813 Inch | 274.65 Millimeter x 7.875 Inch | 200.025 Millimeter DODGE CP4B538-USAF-615TT Pillow Block Bearings | Limiting speed:1200 r/min; Fatigue load limit Pu:28.5 kN; Reference speed:850 r/min; ra max.:2 mm; H:48 mm; d1 ≈:477 mm; Minimum load factor A:14; Da max.:434 mm; D:480 mm; Basic static load rating C0:1630 kN; Size (mm):6.938 Inch | 176.225 Millimeter x 10.813 Inch | 274.65 Millimeter x 7.875 Inch | 200.025 Millimeter ; |
| 4.188 Inch | 106.375 Millimeter x 8.047 Inch | 204.394 Millimeter x 5.25 Inch | 133.35 Millimeter DODGE P4B524-USAF-403TT Pillow Block Bearings | A:34.5 mm; Db2:96 mm; Rα:45 °; End cover:ECY 207; J6:106 mm; B1:38.9 mm; Recommended diameter for attachment bolts, inch G:0.5 in; d:36.513 mm; Hexagonal key size for grub screw N:4.763 mm; Fatigue load limit Pu:0.655 kN; Size (mm):4.188 Inch | 106.375 Millimeter x 8.047 Inch | 204.394 Millimeter x 5.25 Inch | 133.35 Millimeter ; |
DODGE FC-GTM-207 Flange Block Bearings Video