| No. | Brand | C | T | K | l | a | w | M | H |
| CYL-SC-101 | DODGE | - | - | - | - | - | - | - | - |
| INS-SC-108-HT | DODGE | - | - | - | - | - | - | - | - |
| EF4B-S2-203R | DODGE | - | - | - | - | - | - | - | - |
| FC-IP-304RE | DODGE | 110 mm | - | - | - | - | - | - | - |
| INS-SC-111 | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCU-215 | DODGE | - | - | - | - | - | - | - | - |
| P4B-IP-208LE | DODGE | - | - | - | - | - | - | - | - |
| WSTU-S2-407R | DODGE | - | - | - | - | - | - | - | - |
| INS-IP-400L | DODGE | - | - | - | - | - | - | - | - |
| INS-SXR-20M | DODGE | - | - | - | - | - | - | - | - |
| CYL-SC-015 | DODGE | - | - | - | - | - | - | - | - |
| P2B-SCAH-012-FF MOD | DODGE | - | - | - | - | - | - | - | - |
| EF4B-IP-112LE | DODGE | - | - | - | - | - | - | - | - |
| F4B-SCAH-207 | DODGE | - | - | - | - | - | - | - | - |
| NSTU-SXR-203 | DODGE | - | - | - | - | - | - | - | - |
| 66030 | DODGE | - | - | - | - | - | - | - | - |
| INS-SC-105-CR | DODGE | - | - | - | - | - | - | - | - |
| F2B-SXR-107 | DODGE | - | - | - | - | - | - | - | - |
| P4B532-ISAF-507R HYD | DODGE | - | - | - | - | - | - | - | - |
| CYL-SXR-100 | DODGE | - | - | - | - | - | - | - | - |
| 1.5 Inch | 38.1 Millimeter x 2.625 Inch | 66.675 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE SP2B-IP-108R Pillow Block Bearings | Basic Radial Load Rating-Static SCO:16600 N; Accessories:300SWI Non-Filling N; Diameter E:43.1 mm; Width - Inner Ring B1:30.16 mm; Fillet Radius ra:1.00 mm; Speed Rating-Open and Shielded-Grease OSG:9000 rpm; Speed Rating-Open and Shielded-Oil OSO:11000 rpm; Basic Radial Load Rating-Dynamic DC:29600 N; D:72.0000 mm; Width - Outer Ring B0:19.0 mm; Size (mm):1.5 Inch | 38.1 Millimeter x 2.625 Inch | 66.675 Millimeter x 1.875 Inch | 47.63 Millimeter ; |
| 3.438 Inch | 87.325 Millimeter x 6.781 Inch | 172.237 Millimeter x 4.5 Inch | 114.3 Millimeter DODGE P4B520-USAF-307TTAH Pillow Block Bearings | d2 max.:208 mm; Mass rod end:20 kg; Specific dynamic load factor K:100 N/mm²; d4 max.:125 mm; l3 min.:101 mm; N max.:181 mm; Tightening torque bolt with internal hexagon:195 N·m; Material constant KM:330; G:M 100x2; Basic static load rating C0:780 kN; Size (mm):3.438 Inch | 87.325 Millimeter x 6.781 Inch | 172.237 Millimeter x 4.5 Inch | 114.3 Millimeter ; |
| DODGE SFC-IP-102R Flange Block Bearings | Labyrinth ring (dc shaft position):LOR 164; Cap bolt recommended tightening torque:271.2 N·m; J max.:635 mm; R2:46.038 mm; J1:127 mm; Lock washer:W 40; Labyrinth ring (db shaft position):LOR 175; Housing:SAW 240; db:222.25 mm; Da:359.999 mm; |
| DODGE SAF-517X2-15/16 CLSD Mounted Units & Inserts | B:23.80 mm; Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating n1:7000 rpm; Basic Static Radial Load Rating Co:28000 N; d:30.000 mm; Sealed Speed Rating n3:7000 rpm; Accessories:No Shield, no Seal,; D:62.0000 mm; Basic Dynamic Radial Load Rating C:30200 N; |
| DODGE INS-IP-400R Insert Bearings Spherical OD | R1:79.375 mm; PosiTrac Plus contact element:2 x B10724-102; End plug (suffix Y):EPR 12; R2:30.163 mm; Da:215.001 mm; H1:133.35 mm; P120°:72.5 kN; J min.:336.55 mm; Cap bolt recommended tightening torque:1220 N·m; J1:69.85 mm; |
| DODGE F4B-SD-208 Flange Block Bearings | Accessories:Snap-Ring; Basic Static Radial Load Rating Co:38000 N; Oil Speed Rating n2:7500 rpm; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating n1:6300 rpm; d:50.000 mm; Grease Speed Rating Open/Shielded n1:6300 rpm; Fillet Radius ra:2.00 mm; D:110.0000 mm; Sealed Speed Rating n3:4300 rpm; |
| 5.438 Inch | 138.125 Millimeter x 9.05 Inch | 229.87 Millimeter x 6.688 Inch | 169.875 Millimeter DODGE P4B532-ISAF-507R HYD Pillow Block Bearings | Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:212000 N; Grease Speed Rating n1:2200 rpm; B:50.00 mm; Basic Static Radial Load Rating Co:228000 N; D:240.0000 mm; d:110.000 mm; Oil Speed Rating n2:3200 rpm; Size (mm):5.438 Inch | 138.125 Millimeter x 9.05 Inch | 229.87 Millimeter x 6.688 Inch | 169.875 Millimeter ; |
| 6.938 Inch | 176.225 Millimeter x 10.813 Inch | 274.65 Millimeter x 7.875 Inch | 200.025 Millimeter DODGE CP4B538-USAF-615TT Pillow Block Bearings | Limiting speed:1200 r/min; Fatigue load limit Pu:28.5 kN; Reference speed:850 r/min; ra max.:2 mm; H:48 mm; d1 ≈:477 mm; Minimum load factor A:14; Da max.:434 mm; D:480 mm; Basic static load rating C0:1630 kN; Size (mm):6.938 Inch | 176.225 Millimeter x 10.813 Inch | 274.65 Millimeter x 7.875 Inch | 200.025 Millimeter ; |
DODGE INS-SC-108-HT Insert Bearings Spherical OD Video